Choosing a tarpaulin material: canvas, PE, PVC or fire-retardant

Choose a cotton canvas tarpaulin when the load needs to breathe, such as hay, produce or machinery that would sweat under plastic. Choose PE laminate for cheap, short-term cover. Choose PVC-coated polyester for long life, welded waterproof seams and heavy use such as truck sheets. Choose FR PVC where a certificate is required for hot work or venues. Weight in gsm, edge construction and eyelet spacing matter as much as the material.

6 min read ยท Updated

Close-up of woven green tent canvas

The four tarpaulin families

Most tarpaulins sold today fall into four groups. They look similar on a shelf and behave very differently in use.

  • Cotton canvas. Treated woven cotton, breathable and heavy. Our Cotton Canvas Tarpaulin is 450 gsm with roped, stitched edges.
  • PE (polyethylene) laminate. Woven polyethylene tape coated with polyethylene film. Light, cheap, the familiar blue or green sheet. Ours is the 440 gsm Ground Sheet Tarpaulin.
  • PVC-coated polyester. A polyester base cloth coated with PVC on both faces, completely waterproof and weldable. Our PVC Waterproof Tarpaulin is 650 gsm; the truck cover is 900 gsm.
  • Fire-retardant PVC. PVC-coated polyester compounded to resist ignition and supplied with a test certificate, such as our 680 gsm FR tarpaulin.

Tarpaulin materials compared

General characteristics, with our catalogue examples and ex-works guide prices. Freight, duties and sizing change the landed cost.

Tarpaulin materials in the Canvashome range
Cotton canvasPE laminatePVC-coated polyesterFR PVC
Our weight450 gsm440 gsm650 gsm / 900 gsm680 gsm
BreathableYesNoNoNo
WaterproofHighly water-resistant once swollenYes, while undamagedYes, welded seamsYes, welded seams
UV lifeGood with treatmentShort unless stabilisedLong with stabilisersLong with stabilisers
Tear and abrasionGoodFair; tears spreadVery goodVery good
RepairSew a patchTape (temporary)Weld a patchWeld a certified patch
Typical useHay, produce, machinery, tent fliesShort-term cover, under tentsLong-term cover, truck sheets, storesHot work, venues, events
PriceOn enquiryOn enquiryOn enquiryOn enquiry

Breathability: why canvas tarps are still sold

A plastic sheet over a damp load traps moisture. When the temperature drops, it condenses on the underside and drips back onto whatever you were protecting. Hay heats and moulds, timber stains and machinery rusts. A cotton canvas tarpaulin sheds rain but lets vapour escape, so the load stays drier underneath. That is the reason farmers, restorers and machinery owners still specify canvas despite its weight. The same principle is why tents people sleep in are made of canvas; see canvas vs polyester tents.

Canvas has the usual cotton caveats. It is heavy, it must dry before folding away, and it is not suitable where a fully impermeable barrier is required.

Where a sealed sheet is needed over a load that also needs air, the practical answer is ventilation rather than a different material. Support a PVC sheet clear of the load on battens or a frame, leave the ends open, and give moisture a way out. A sheet draped flat over a damp stack will always condense, however good it is.

What heavy duty means on a tarpaulin

Tarpaulin weight is quoted in gsm, and more weight generally means a stronger, longer-lived sheet. But weight alone can mislead with coated fabrics, because coating adds grams without adding much strength. For PVC, ask for the base cloth specification and the tensile and tear strengths, not only the total gsm. For PE, ask whether it is UV-stabilised and for the weave density; cheap PE can lose strength within months in strong sun.

"Heavy duty" has no fixed meaning. As a rule of thumb, sub-200 gsm PE is light-duty and short-term; 400 gsm and up is serious general cover; 600 to 900 gsm PVC is for daily mechanical use, such as truck curtains and covers that are tensioned and released repeatedly.

For cold climates, ask for a PVC cold-crack rating. PVC stiffens as it gets colder and can crack if folded below its rated temperature. In very hot climates the opposite applies: dark PVC sheets get hot enough in direct sun to soften slightly and to scorch whatever they touch, so a light colour is usually the better choice for a sheet that lies on a load all day.

Edges, eyelets and seams

Most tarpaulins fail at the edge. A wind-loaded sheet pulls hardest on its tie points, so edge construction largely decides how long the sheet lasts.

  • Roped edges: a rope sewn or welded into the hem spreads load from each eyelet along the edge. Our cotton tarpaulin is roped and stitched.
  • Eyelet spacing: closer spacing spreads load and stops flapping. Ours run at 50 cm on PVC and FR tarpaulins, 60 cm on canvas and 100 cm on the PE ground sheet.
  • Eyelet material: solid brass on canvas, rustproof eyelets on PVC. Plated steel rusts and stains.
  • Corners: reinforcing patches at the corners, where loads combine, are worth paying for.
  • Seams: radio-frequency welded seams on PVC are fully waterproof and stronger than stitching. Sewn seams on canvas swell shut when wet.

Cut size vs finished size

Size is where many tarpaulin orders go wrong. Some tarpaulins are sold by their cut size, the size of the cloth before hemming, so the finished sheet is smaller than the label. Always ask whether a size is cut or finished, and measure what you need with a margin for overhang and tie-down. Truck sheets in particular should be made to the body dimensions; our Truck Cover Tarpaulin is cut to the vehicle with a continuous rope channel rather than sold in a standard size.

Special cases: hot work, venues and ground sheets

For welding screens, hot-work enclosures and covers in public venues, a fire authority or site safety officer will usually ask for a certificate. Our Fire-Retardant Tarpaulin is supplied with the lot test paperwork; confirm the standard your site requires first, as explained in fire-retardant tent canvas and the standards that matter.

Under a tent, a tarpaulin is a consumable that protects an expensive floor from abrasion and ground damp. Cut it slightly inside the tent footprint so rain running off the walls does not land on the sheet and flow underneath. For anything else, browse all Tarpaulins or ask for a quote with your sizes.

Questions buyers ask

Which tarpaulin material is most waterproof?

PVC-coated polyester with welded seams is completely impermeable. PE is waterproof while undamaged; canvas is highly water-resistant once swollen and also breathes.

Is a canvas or plastic tarp better for hay or machinery?

Canvas, because it lets moisture escape. Plastic traps condensation underneath, which can mould hay and rust metal.

How long does a PVC tarpaulin last?

A good UV-stabilised PVC tarpaulin lasts many years of outdoor use; cheap PE sheets may last a season. Life depends on sun, wind and how often it is handled.

What does gsm mean on a tarpaulin?

Grams per square metre, the weight of the sheet. Heavier is usually stronger, but for coated sheets ask for the base cloth and tear strength too.

Can a PVC tarpaulin be repaired?

Yes. Weld or bond a patch of the same material over the damage for a permanent, waterproof repair.

Pieces in this guide

Read next

Request a quote