Camouflage fabric guide: patterns, base cloths and specifications

Camouflage fabric is defined by three things: the pattern and its colours, the base cloth it is printed on, and the performance tests it must pass. Woodland and desert patterns on treated cotton canvas suit tentage and covers; digital patterns on poly-cotton ripstop suit uniforms, load carriage and light shelter. For military contracts, the colour standards, fastness tests and any infrared requirement come from the buyer’s specification and must be tested on the production lot.

6 min read · Updated

Canvas relief tent pitched on open ground

Camouflage pattern families and where they work

Camouflage patterns fall into broad families. Woodland patterns use large irregular shapes in greens, browns and black to break up outlines in temperate vegetation. Desert patterns use sand, tan and brown in fewer colours for arid ground. Digital or pixel patterns use small square elements that blend at a range of distances. Each country’s forces have their own patterns and exact colour standards, many of which are restricted.

We print the common families on stock cloths in our camouflage print fabrics range, and print to a buyer’s artwork and colour standards for contract work where the buyer holds the rights to the pattern.

Our stock camouflage fabrics (prices on enquiry)
FabricPatternBase clothBest forPrice
Woodland Camouflage CanvasFour-colour temperate disruptiveTreated cotton canvasTentage, covers, load-carrying equipmentOn enquiry
Desert Camouflage CanvasThree-colour aridTreated cotton canvas, uprated UV stabiliserTentage and covers in hot, sunny regionsOn enquiry
Digital Camouflage RipstopDigital pixelPoly-cotton ripstop with DWR finishUniform, load carriage, light shelterOn enquiry

Choosing a base cloth for camouflage fabric

The base cloth decides how the fabric behaves; the print decides how it looks. Treated cotton canvas is heavy, breathable, quiet and easy to repair, which is why it remains the standard for military tents and vehicle covers. Our Woodland Camouflage Canvas and Desert Camouflage Canvas are printed on treated cotton for that work.

Poly-cotton ripstop is lighter and tears less readily, because the reinforcing grid stops a tear running. It suits clothing and webbing equipment, and shelters that must be carried. Our Digital Camouflage Ripstop carries a durable water-repellent finish. Coated nylons, such as the 210D ripstop of our basha sheet, are used where low weight and full waterproofing matter more than breathability.

Weight follows use. Tent canvas is specified heavier than clothing fabric because it carries wind load and abrasion for years; uniform fabric must be light enough to wear in heat. When a specification gives a fabric weight, it should also give the test method and the tolerance, since printing and finishing add weight and a cloth weighed before finishing will differ from the finished goods.

Colour fastness tests for camouflage fabric

A camouflage pattern that fades to a single pale tone in one summer has stopped working. Colour fastness is tested under the ISO 105 series of methods, which covers resistance to light, washing, rubbing, water and perspiration, among others. A specification will name the parts that apply and the minimum grade required for each.

Fastness is graded on standard grey scales, with higher numbers meaning less change. Testing should be done on the finished, production-run cloth, because the finishing chemicals applied after printing can change the result. One test report from a trial run tells you little about a bulk order made months later.

  • Light fastness, tested under artificial daylight, predicts how the print stands up to sun.
  • Wash fastness matters for clothing and anything that will be laundered.
  • Rubbing fastness, dry and wet, shows whether colour transfers onto skin, kit or other fabric.
  • Water and perspiration fastness matter for uniforms and items carried against the body.

UV stability and desert use

Ultraviolet light breaks down both dyes and fibres. In arid regions it is the main cause of failure, ahead of rain or abrasion. Our desert print carries an uprated UV stabiliser for that reason. For long deployments in strong sun, specify UV-resistant finishes on the base cloth and require test reports for strength retention after exposure as well as for colour.

Our guide to the best tent fabric for desert climates goes further into fabric choices for heat and sun.

Infrared and other signature requirements

Modern observation equipment sees beyond visible light. Many military specifications therefore set requirements for how a fabric reflects near-infrared light, so that it does not glow against vegetation through night vision devices. Meeting these requirements depends on the dyes and pigments, the base fibre and the finishing, and is verified by laboratory measurement against the buyer’s reference curves.

If your specification includes infrared requirements, tell us at enquiry stage. We will discuss the dye and print route and arrange testing on the production lot. Do not assume a fabric that looks right meets an infrared standard; only measurement shows it.

Shine is another giveaway. Coated and synthetic fabrics can reflect light at certain angles, which is why many specifications limit gloss or call for a matt finish. Cotton canvas is naturally matt, which is another reason it is still common for tentage that must not draw the eye.

Pigment printing, dyeing and finishing

Our stock camouflage cloths are pigment printed: the colours sit in a binder bonded to the fibre surface. Pigment printing is economical and gives sharp pattern edges. For some military specifications, vat dyes or other dye systems are required for fastness or infrared performance. The finishing then adds water repellency, rot and mould resistance and, if required, flame retardancy. Each finish can affect the others, so specify the combination you need and test the finished cloth.

Buying camouflage fabric by the metre or as finished goods

You can buy our camouflage fabrics by the metre to make your own tents and covers, or have us make finished items: tents such as our Army Ridge Tent, bashas, vehicle covers and nets. Plain olive drab or sand canvas is a lower-cost alternative for training and non-tactical use.

For contract printing, send the pattern artwork or reference sample, the colour standards, quantities and the test requirements through our contact page. Guide prices are ex works; print set-up, colour matching, testing, freight and duties all affect the final cost.

Questions buyers ask

What fabric is camouflage printed on?

Most commonly treated cotton canvas for tents and covers, poly-cotton ripstop for uniforms and equipment, and coated nylon for lightweight shelter sheets.

Can you print a national military camouflage pattern?

Only for buyers authorised to use it. Many national patterns are protected, so we need the buyer’s authority, artwork and colour standards before printing.

Will camouflage canvas fade in the sun?

All prints fade eventually. Good light fastness and a UV stabiliser slow it considerably, which is why our desert canvas carries an uprated UV stabiliser.

Is your camouflage fabric infrared compliant?

Our stock prints are not sold as meeting a particular infrared standard. Where a specification sets infrared requirements, we discuss the dye route and test the production lot against it.

What is the difference between camouflage canvas and ripstop?

Camouflage canvas is a heavier treated cotton for tents and covers. Ripstop is a lighter poly-cotton with a reinforcing grid that stops tears spreading, used for clothing and light equipment.

Can I buy small quantities?

Stock camouflage fabrics can be ordered by the metre. Custom patterns and colour standards need larger runs to justify the print set-up.

Pieces in this guide

Read next

Request a quote